1996 > 2002
REMOTE
TRANSMITTER PROGRAMMING FOR LUXURY MODELS
NOTE :
All remote transmitters must be programmed at this time, otherwise they will
not work.
NOTE :
Maximum of 4 transmitters can be
programmed.
1. Switch ignition to the RUN
position then back to OFF.
NOTE :
This switches of the theft alarm system.
2. Remove the RADIO FUSE number 17.
3. Switch ignition from the OFF
position to the RUN position and
back OFF 3 times within 5
seconds.
4. The doors will LOCK and UNLOCK to confirm programming mode.
5. PRESS and HOLD the LOCK and UNLOCK buttons on the remote transmitter for 15 seconds.
6. The doors will LOCK and UNLOCK to confirm programming mode.
7. Repeat step 5 for all
additional remote transmitters.
8. Replace the FUSE.
9. Check all remote transmitters for correct operation.