1991 > 1996
1. Locate the RKE programming
connector in the rear trunk/boot area.
2. It should have 1 connection
and should not be plugged into anything else.
3. Connect the 1 terminal to a
suitable GROUND connection using a
suitable cable.
4. The Remote Keyless Entry module will cycle the locks from LOCK to UNLOCK to confirm programming mode.
5. PRESS any button on the first remote transmitter to be programmed.
6. The doors will cycle LOCK to UNLOCK to confirm programming.
7. Repeat for any additional remote transmitters.
8. REMOVE the wire from the connector.
9. Check all remote transmitters for operation.
NOTE : Maximum 2 remote transmitters can be programmed.