1.    Turn ignition ON.

2.    Turn radio OFF.

3.    PRESS Driver Information Center (DIC) RESET button.

4.    PRESS OPTIONS button on DIC until display is blank.

5.    PRESS and HOLD RESET button for 3 seconds.

6.    PRESS OPTIONS button until FOB TRAINING is displayed.

7.    PRESS RESET button to begin programming

NOTE : The diplay will show HOLD LK + UNLK 1^ST FOB

8.    At the same time PRESS and hold LOCK and UNLOCK buttons on first remote for 16 seconds. The display will indicate when remote is programmed. 

9.    Repeat step 8 for any additional remote transmitters.

10. SWITCH ignition OFF and REMOVE key from ignition.

11. TEST all remote transmitters.