ADDING NEW SIGMA REMOTE TRANSMITTERS TO SYSTEM

IMPORTANT NOTICE:

When teaching one or more radio transmitters into the security system ALL previous radio transmitters will be erased from the security system.

You must teach ALL the radio transmitters during the Teaching New Radio Transmitters to the Security System process.

When using the keypad, each time a button is pressed the LED on the keypad will FLASH ONCE as confirmation.

NOTE : DO NOT the next button until the keypad has flashed once to confirm button has been pressed.

NOTE :  You have 10 seconds to enter the NEXT character. If you DO NOT PRESS the next character within this time period the LED on the keypad will flash repeatedly. You you must start the sequence again from the beginning if this happens.

With the ignition OFF and the security system disarmed, type into the keypad the following:

1. Where 1234 represents the 4-digit PIN code and 2 represents the total number of radio transmitters to be recognised by the security system (MAX 4).

2. To confirm correct input of you PIN code the siren will bleep after entering the last digit. The numeric 91 is the access code or command, which tells the alarm unit to accept the new transmitters.

3. Then PRESS the button on the first radio transmitter, the siren will BEEP, now PRESS the button on the second radio transmitter, the siren will BEEP again, continue with 3RD and 4TH radio transmitters (if applicable).

4. After PRESSING your final radio transmitter, wait 10 seconds. Finally TEST that all your radio transmitters arm and disarm the security system.

EXAMPLE

So for example if the PIN code is 1234 and you wish to program in 2 radio transmitters you would type in:

Then PRESS the remote keys at the appropriate time.

** 1234         Your PIN code (the alarm will bleep).

* 91                Notifies the alarm that you want to program the radio transmitters.

* 2                  The number of radio transmitters that you want to program in.

#                      Confirms you want to program radio transmitters.