PROCEDURE

NOTE : Ensure Ignition switch in OFF position and drivers door open. 

NOTE : This procedure must be completed within two minutes.

1.    Switch the ignition ON and OFF.

2.    CLOSE and OPEN the drivers door TWICE – so door ends up in the OPEN position.

3.    Switch the ignition ON and OFF.

4.    CLOSE and OPEN the drivers door TWICE – so door ends up in the OPEN position.

5.    CLOSE the drivers door.

6.    LOCK the door using the door lock button on the door.

7.    Switch the ignition ON and then OFF.

8.    UNLOCK using the door lock button on the door - the locks will cycle to indicate programming mode.

9.    Remove key from ignition.

NOTE : Some models require you to leave it in the ignition.

10. PRESS and release both LOCK and UNLOCK buttons on the remote transmitter.

11. PRESS and release LOCK button on the remote.

12. PRESS and release UNLOCK button on the remote.

13. Check remote transmitters for operation.