NOTE : Before entering programming mode, ensure you have all of the transmitters you will be using on the vehicle.

NOTE : Once you program the transmitter, all previous transmitters will be erased from the memory. Any other transmitters will not be functional until you program the transmitters again.  

1.         Insert keys in ignition and leave in the OFF position.  

2.         Locate the OBD port, see www.wikiobd.com for location information or download the app from the Google Play or Apple IOS Stores.

3.         Make sure there are metal contact pins in terminals 8 and 4. Connect 8 and 4 with a suitable jumper wire (leave the jumper wires connected throughout the programming procedure.

4.         The vehicle will respond by LOCKING then UNLOCKING the doors to signify entering of the programming mode.  

5.          PRESS and HOLD both the LOCK and UNLOCK buttons together on the first transmitter to be programmed for about 30 seconds, the vehicle will respond by LOCKING then UNLOCKING the doors.

6.         RELEASE the buttons on the transmitter.  

7.         Within 1 minute, repeat the step 5 and 6 on the remaining transmitter (including any old ones).  

8.         Remove jumper wire applied to the OBD Port.