1995 > 1997
1. Maximum 4 Remote transmitters
1. Enter 5
digit permanent entry code into the keyless entry keypad.
2. Within 5 seconds of pressing
the final digit, press the 1-2 button.
3. All doors will LOCK and then UNLOCK to confirm programming mode.
4. Press any button on the first remote transmitter within 5 seconds of pressing the 1-2 button.
5. The door locks will LOCK and UNLOCK to confirm successful
programming.
6. Press any button on the next remote transmitter to be programmed within
5 seconds of the previous step.
7. The door locks will LOCK and UNLOCK to confirm successful
programming.
8. Repeat for up to 4
transmitters.
9. Press the 7-8 and 9-0 buttons simultaneously to exit
programming mode.
NOTE :
If the keypad light goes out before programming is completed, you must start
again.