1996 > 1998
1. Maximum 4 Remote transmitters
1. Enter the vehicle, CLOSE and LOCK all doors.
2. INSERT and REMOVE KEY from the IGNITION 6 times within 10 seconds.
3. The TAIL LIGHTS should flash to indicate original codes have been erased.
4. TURN ignition to ACC position.
5. Press LOCK button on the
first remote transmitter to be programmed.
6. TAIL lights will flash to confirm
programming.
7. To program additional remote transmitters, UNLOCK and then LOCK the
doors using the power lock
switch located on the drivers door.
8. Press LOCK button on the next
remote transmitter to be programmed.
9. Repeat for up to 4 remote transmitters.
10. Open drivers door and turn
ignition OFF.