2000 > 2002
1. Maximum 4 Remote transmitters
1. OPEN the vehicle and enter, then CLOSE and LOCK all doors.
2. Slowly INSERT and REMOVE ignition key 6 times within 10 seconds.
NOTE :
DO NOT turn key, just insert fully
and remove.
3. The TAIL LIGHTS will flash to indicate all existing remote transmitters have
been erased
4. TURN ignition switch to the ACC
position.
5. Press any button on the 1st
remote transmitter to be programmed.
6. The HAZARD lights will flash
to confirm programming.
7. To program additional remote transmitters, UNLOCK and LOCK the
doors using the power lock switch located on the drivers door.
8. Press any button on the 2nd
remote transmitter.
NOTE :
UP to 4 remote transmitters can be
programmed.
9. Repeat steps 8 and 9 for any additional remote transmitters.
10. Open drivers door, and switch ignition OFF to end programming.