NOTE : Maximum of 6 remote transmitters can be programmed.

1.    Switch ignition ON.

2.    Ensure all doors and trunk/boot are closed.

NOTE : Point remote control transmitter at the door function control module located in the drivers door.

3.    Within 4 seconds press the LOCK or UNLOCK button of the first remote transmitter.

4.    Within 4 seconds switch ignition OFF.

5.    Within 4 Repeat steps 1 to 4 again, 3 more times.

6.    End with ignition ON.

7.    Within 4 seconds press the LOCK button on the first remote transmitter.

8.     The doors will make a clunk noise to indicating programming mode.

9.    Within 10 seconds press the LOCK button on all the remote transmitters to be programmed

10. Within 10 seconds press the LOCK or UNLOCK button on the first remote transmitter.

11.  The locks will cycle LOCK to UNLOCK to confirm each remote transmitter is programmed.

12.  Switch ignition OFF.

13.  Check operation of all remote transmitters.