1994 > 2002
PROGRAMMING
PROCEDURE
CENTRAL DOOR LOCK (1 BUTTON KEY)
1. Ensure all doors are UNLOCKED
using the key.
2. PRESS and HOLD remote transmitter key
button until LED stops flashing.
3. After releasing button, LED
will light constantly.
4. PRESS the remote transmitter button ONCE,
and LED will extinguish.
5. OPEN the door and HOLD the remote
transmitter key near the Ignition switch, and PRESS the remote transmitter button one time.
6. Now switch the ignition ON,
and wait 10 seconds then turn
ignition OFF.
7. After 5 seconds, remote
transmitter should now operate.
CENTRAL DOOR LOCK with DEADLOCKING
(2 BUTTON KEY)
1. Ensure all doors are UNLOCKED
using the key.
2. PRESS and HOLD the large remote
transmitter key button while the LED
flashes for 20 seconds.
3. After 20 seconds PRESS the small deadlock button ONCE while still holding the large
button.
4. The LED will stop flashing.
5. Release the large button and the LED
will light constantly.
6. PRESS the large button ONE time,
and the LED will go out.
7. OPEN the door and HOLD the remote
transmitter key near the Ignition switch, and PRESS the LARGE remote
transmitter button one time.
8. Now turn the ignition ON, and
wait 10 seconds then turn ignition OFF.
9. After 5 seconds, remote
transmitter should now operate.