1999 > 2004
PROGRAMMING
NOTE : Maximum 4 remote transmitters can be programmed.
1.
PRESS remote transmitter UNLOCK button to ensure alarm is deactivated.
2.
OPEN the drivers door.
3.
Enter
the vehicle and CLOSE the drivers door.
4.
Switch
ignition from LOCK to ON 10
times within 15 seconds.
5.
The
HORN will sound to indicate programming mode.
6.
Within
45 seconds OPEN and CLOSE the
drivers door once..
7.
PRESS the LOCK
or UNLOCK button on the remote
transmitters to be programmed.
8.
The
HORN will sound twice to indicate
programming is successful.
9.
Repeat
step 7 and 8 for all remote transmitters.
10. Remove ignition key from ignition, the
HORN should sound 3 times to indicate end of programming mode.
NOTE : To delete any existing remote transmitters
from the system, you must program the new remote transmitters to fill the
memory up, so if you have only one remote transmitter then you must program it
4 times to fill in all the memory slots. If you have 2 remote
transmitters then you must program each one twice.
SYNCHRONISATION
1.
Press
remote transmitter LOCK or UNLOCK button 6 times.
2.
Check
remote transmitter for operation.