1995 > 1999
CODEALARM SYSTEM
PROGRAMMING
1.
OPEN the drivers door.
2.
Switch
ignition ON.
3.
PRESS and HOLD
the programming button, located under the dashboard facia.
4.
After
HOLDING for 15 seconds the door locks will cycle from LOCK to UNLOCK 3 times.
5.
KEEP HOLDING
the programming button.
6.
PRESS the LOCK
button on each of the remote transmitters to be programmed.
7.
The
doors will LOCK and UNLOCK for each remote transmitter
programmed.
8.
Release
the programming button to end programming mode.
9.
Switch
ignition OFF.
10. Check all remotes for correct operation.