1999 > 2003
1. Ensure the doors lock and unlock using the key.
2. With ignition OFF connect
pins 1 and 4 of the OBD connector
together using a suitable jumper pin.
3. Within 10 seconds of connecting
the jumper switch ignition from OFF
to ACCESSORY 3 times within 2
seconds.
4. The doors will LOCK and UNLOCK.
5. PRESS the LOCK or UNLOCK button on the first remote
transmitter 3 times within 10 seconds of the first press.
6. The doors will LOCK and UNLOCK.
7. Repeat step 5 for additional remote transmitters.
8. REMOVE Jumper connection.
9. Check all remote transmitters for correct operation.
NOTE :
ALL remote transmitters must be programmed within 1 minute of entering the
programming mode.
NOTE :
Programming mode will end when 4 transmitters are programmed, Jumper is
disconnected or Ignition is switched ON.