1.    CLOSE all doors.

2.    PRESS and HOLD the driver side door lock switch to the UNLOCK position.

3.    INSERT key into ignition and REMOVE it 3 times, DO NOT TURN. and leave in the OFF position.

4.    RELEASE the driver side door lock switch.

5.    The Body Control Module (BCM) will  sound 3 beeps to confirm programming mode.

6.    PRESS the LOCK and UNLOCK buttons on the remote transmitter together for around 5 seconds.

7.    The BCM will sound 2 beeps to confirm remote transmitter is programmed.

8.    Repeat step 6 and 7 for additional remote transmitters.

9.    REMOVE key from ignition.

10.  Check all remote transmitters for correct operation.

NOTE : Maximum 4 remote transmitters.

NOTE : ALL previously programmed remote transmitters will be erased when procedure is complete.