1992 > 1995
TVSS
DEALER
FITTED REMOTE KEYLESS ENTRY PROGRAMMING
ERASE
ALL REMOTE TRANSMITTER (PROCEDURE 1)
1. Turn ignition to the ACC
position, ensure all doors, boot/hood and bonnet/hatch are closed.
2. Press the programming switch on the main TVSS ECU for more than 2 seconds, the security LED will light for 5 seconds.
NOTE : The location of the TVSS ECU is under the drivers seat in most vehicles.
3. With the security LED ON press the programming switch again
for 2 seconds.
4. The HORN will sound twice and
the security LED will switch OFF.
5. ALL remote transmitters are now erased.
ADD
REMOTE TRANSMITTERS (PROCEDURE 1)
1. Turn ignition switch to OFF
position, ensure all doors, boot/hood and bonnet/hatch are closed.
2. Turn ignition switch to ACC
position.
3. Press the programming switch on the main TVSS ECU for more than 2 seconds, the security LED will light for 5 seconds.
4. With the security LED ON press the button on the remote
transmitter once.
5. Repeat steps 1 to 4 for additional remote transmitters.
ADD
REMOTE TRANSMITTER (PROCEDURE 2)
NOTE : A maximum of 4 remote transmitters can be
programmed.
1. Ensure the alarm has been disarmed.
2. Switch the ignition to the ACC
position.
3. Press the programming switch on the main TVSS ECU for more than 2 seconds, the security LED will light for 5 seconds.
4. While the security LED is ON, press the LOCK and UNLOCK button
together on the remote transmitter until the hazard lights flash once.
5. For LHD vehicles the horn
will sound.
6. Repeat steps 2 to 4 for additional remote transmitters.
ERASE
ALL REMOTE TRANSMITTERS (PROCEDURE 2)
1. Ensure the alarm has been disarmed.
2. Switch the ignition to the ACC
position.
3. Press the programming switch on the main TVSS ECU for more than 2 seconds, the security LED will light for 5 seconds.
4. While the security LED is ON, press the programming switch on the
main TVSS ECU again until the hazard lights flash once.
5. For LHD vehicles the horn
will sound.
6. All remote transmitters are now erased.
NOTE : The security LED will now flash until a new remote
transmitter is programmed.