2004 > 2007
1. battery 2025
1. CLOSE all doors and LOCK them
using the LOCK button on the door.
2. INSERT and REMOVE key from the
ignition between 7 and 10 times until the hazard lights FLASH.
3. INSERT key into ignition and turn to ACC
position.
4. The system is now in programming mode, and all existing remote
transmitters are erased.
5. PRESS the LOCK button on the
remote transmitter.
6. The hazard lights will FLASH
once.
7. If additional remote transmitters are required, UNLOCK and LOCK the
doors using the power LOCK button on
the door.
8. PRESS the LOCK button on the next
remote transmitter to be programmed.
9. Repeat step 7 and 8 for additional remote transmitters.
10. REMOVE key from ignition.
11. UNLOCK, OPEN and CLOSE drivers side door.
12. Check all remote transmitters for operation.
NOTE :
Maximum 4 remote transmitters can be
programmed.