1994 > 2000
1. Locate the keyless entry RKE control module, drivers
side, under the dash above fuse board.
2. Locate the BLACK and WHITE wires
coming from the module.
3. Normally the wires are disconnected or lead
to a VALET switch.
4. SWITCH ignition ON.
5. CONNECT the BLACK
and WHITE wires together 13 times or use the VALET switch if connected.
6. PRESS button 1 on the remote transmitter.
7. SWITCH ignition OFF.
8. PRESS button 1 on the remote transmitter.
9. The doors should LOCK and UNLOCK to
confirm programming.
10. SWITCH ignition ON.
11. CONNECT the BLACK
and WHITE wires together 14 times or use the VALET switch if connected.
12. PRESS button 2 on the remote transmitter.
13. SWITCH ignition OFF.
14. PRESS button 1 on the remote transmitter.
15. The drivers door
should UNLOCK, if it LOCKS then press button 1 to unlock.
16. PRESS button 2.
17. The doors should UNLOCK.