1998 > 2003
REMOTE
CONTROL REGISTRATION
1. OPEN driver side door and leave OPEN.
2. LOCK and UNLOCK the drivers door using the power door lock switch on the door.
3. INSERT key into the ignition.
4. SWITCH ignition to ON position and
return to LOCK position 3 times within 10 seconds. LEAVE key in
the ignition.
5. CLOSE and OPEN the drivers door 3
times. Leave door OPEN after this
step.
6. The
doors should LOCK and UNLOCK or a CHIME/BUZZ will be heard.
NOTE :
If you do not hear anything or the doors do not unlock, wait 1 minute and
repeat step 5.
7. PRESS ANY button on remote
transmitter to be programmed 2
times. Doors should LOCK and UNLOCK.
8. For additional remotes transmitters repeat Step 7.
NOTE :
If you only have 1 or 2 remote transmitters then program the same transmitter 2
or 3 times to fill memory and ensure all existing remote transmitters are
erased.
9. OPEN the drivers door one time and the ECU
will respond with 2 CHIME/BUZZ noises or 2 door LOCKS and UNLOCKS to confirm programming.
NOTE :
Maximum 3 remotes.