1.    Ensure drivers door is closed.

2.    HOLD down the power unlock button located on the door panel.

3.    Turn ignition to ON.

4.    Turn ignition OFF.

5.    Turn ignition ON.

6.    Turn ignition OFF.

7.    Release the power unlock button.

8.    The vehicle will LOCK and UNLOCK the doors.

NOTE : ALL remote transmitters must be programmed at this point, any not programmed will not work.

9.    HOLD the LOCK and UNLOCK buttons on the remote transmitter to be programmed until the doors LOCK and UNLOCK.

10. Repeat 9 for all additional remote transmitters.

11.  Switch ignition to ON to close the programming mode.