1.    Switch the DASHBOARD SECURITY SWITCH OFF, so there is no light on.

2.    Switch ignition ON then OFF, leaving the key in the OFF position.

3.    Quickly PRESS the DASHBOARD SECURITY SWITCH ON and OFF until the HORN sounds.

4.    The system will indicate programming mode by flashing the parking lights and control unit clicking.

5.    IF programming 1 remote transmitter PRESS the remote button 4 times slowly.

6.    IF programming 2 remote transmitters PRESS each remote 2 times slowly.

7.    Switch ignition ON then OFF.

8.    Ensure parking lights are not flashing, and remove key.

9.    Check remote transmitters for correct operation.

NOTE : Maximum 2 remote transmitters can be programmed.