REMOTE CONTROL PROGRAMMING

1.    Switch Ignition OFF and with the RED Immobiliser LED light flashing.

2.     PRESS and HOLD the central door locking button on the DASHBOARD until the RED LED LIGHT goes OFF.

3.     Keep pressing the central locking button until the RED LIGHT light starts to flash.

4.    Wait until the light has flashed the number of times equal to the first digit of the PIN CODE, then RELEASE the BUTTON.

5.    PRESS the BUTTON on the dash to lock again until it has flashed the second digit of the PIN, then release.

NOTE : Continue this procedure until all four digits of the PIN have been entered.

6.    At this time you can start the vehicle or Program the remote by pointing remote at rear view mirror area and pressing the remote button at least 3 times until the door locks cycle.