1.    OPEN the drivers door.

2.    INSERT key switch ignition to ACC and then to LOCK position 3 times, within 3 seconds.

3.    Within 10 seconds CLOSE and OPEN the door 2 times..

4.     Switch ignition to ACC and then to LOCK position 3 times, within 3 seconds.

5.    Within 10 seconds CLOSE and OPEN the door 2 times..

6.    The door locks should cycle from LOCK to UNLOCK to confirm programming mode.

7.     Within 20 seconds, PRESS the LOCK button on the remote transmitter to be programmed.

8.    The door locks will cycle from LOCK to UNLOCK to confirm programming.

9.    Within 20 seconds, PRESS the UNLOCK button on the remote transmitter to be programmed.

10.  The door locks will cycle from LOCK to UNLOCK to confirm programming.

11.  The doors will LOCK and UNLOCK for each remote transmitter programmed.

12.  REPEAT complete procedure for additional remote transmitters.

13.  Switch ignition OFF.

14.  Check operation of all remote transmitters.