1.    SWITCH the VALET/OVERRIDE SWITCH to the ON position.

NOTE : VALET/OVERRIDE SWITCH is located under the driver side dash panel.

2.    SWITCH ignition to ON then OFF.

3.    SWITCH the VALET/OVERRIDE SWITCH OFF then ON to OFF 2 times.

4.    A confirmation chirp should sound to confirm programming mode.

5.    SWITCH ignition to ON then OFF 2 times.

6.    A confirmation chirp should sound to confirm programming mode.

7.    PRESS the GREEN button on the first remote transmitter.

8.    PRESS the GREEN button on the second remote transmitter.

9.    A chirp will sound to confirm programming of each remote transmitter.

10.  After 5 seconds programming mode will close.

NOTE : Maximum 2 remote transmitters can be programmed.