1.     Switch ignition ON.

2.     PRESS and HOLD the remote transmitter UNLOCK button for at least 4 seconds, but no longer than 10 seconds.

3.     At the same time PRESS the remote transmitter PANIC button for at least 1 second.

4.     Release BOTH buttons.

5.     A sound will be made to indicate programming mode.

6.     With the NEW Remote transmitter, within 30 seconds PRESS and HOLD the remote transmitter LOCK and UNLOCK buttons at the same time for 3 seconds.

7.     PRESS and RELEASE remote transmitter UNLOCK button.

8.     A sound will be heard to indicate programming is a success.

9.     Repeat step 6 to 8 for additional remote transmitters.

10.   Switch ignition OFF and wait for 60 seconds to exit programming mode.

11.   Check all remote transmitters for operation.

NOTE : A working remote transmitter is required to program in additional remote transmitters.

NOTE : A maximum of 4 remote transmitters can be programmed.